HIKARI POWER

SF-C11 SUNX ราคา 4,000 บาท

฿4000.00

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : SUNX
รหัสสินค้า : 000139

รายละเอียดสินค้า SF-C11 SUNX ราคา 4,000 บาท

Item	Specifications
Product Number	SF-C11
Part Number	SF-C11
Features	Less setup time for safety circuits
Connectable light curtains	SF4B/SF2B series
Supply voltage	24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption	100 mA or less (without light curtain)
Fuse (power supply)	Built-in electronic fuse, Triggering current: 0.5 A or more, Reset after power down
Enabling path	NO contact x 3 (13-14, 23-24, 33-34)
Enabling path:Application category	AC-15, DC-13 (IEC 60947-5-1)
Enabling path:Rated operation voltage (Ue) /Rated operation current (le)	6 A / 30 V DC, 6 A / 230 V AC, resistive load (For inductive load, during contact protection) Min. applicable load: 10 mA (at 24 V DC) (Note) If several SF-C11 or SF-C13 units are being used in a line together, leave a space of 5 mm 0.197 in or more between each unit.
Enabling path:Contact material / contacts	AgSnO, self cleaning, positively driven
Enabling path:Contact resistance	100 mOhm or less (initial value)
Enabling path:Contact protection fuse rated	6 A (slow blow)
Enabling path:Mechanical lifetime	10 million operations or more(switching frequency 180 operations/min.) (Note) Relay switching lifetime will vary depending on factors such as the type of load, the switching frequency, and ambient conditions.
Enabling path:Electrical lifetime	100,000 operations or more (switching frequency 20 operations/min., 230 V AC / 3 A resistive load) (Note) Relay switching lifetime will vary depending on factors such as the type of load, the switching frequency, and ambient conditions.
Pick-up delay(Auto reset / Manual reset)	80 ms or less / 90 ms or less
Response time	10 ms or less
Auxiliary outputs	Safety relay contact (NC contact) x 1 (41-42) (Related to enabling path)
Auxiliary output:Rated operation voltage / current	24 V DC / 2 A, Min. applicable load: 10 mA (at 24 V DC)
Auxiliary output:Contact protection fuse rated	2 A (slow blow)
Semiconductor auxiliary output(AUX)	<Minus ground (Setting for PNP)> - Max. source current: 60 mA - Applied voltage: same as supply voltage (between the semiconductor auxiliary output and +V) - Residual voltage: 2.3 V or less (at source current 60 mA) Leakage current: 2 mA or less <Plus ground (Setting for NPN)> - Max. sink current: 60 mA - Applied voltage: same as supply voltage (between the semiconductor auxiliary output and 0 V) - Residual voltage: 1.5 V or less (at sink current 60 mA) Leakage current: 2 mA or less
Semiconductor auxiliary output(AUX):Output operation	Related to auxiliary output of light curtain
Overvoltage category	II
Indicators:Power supply (Ui)	Green LED (lights up when the power is ON)
Indicators:Enabling path [OUT]	Green LED (lights up when enabling contacts are closed)
Indicators:Interlock (INTER_LOCK)	Yellow LED (lights up when enabling contacts are opened)
Indicators:Fault (FAULT)	Yellow LED (blinks when fault occurs)
External relay monitor function	Incorporated
Trailing edge function	Incorporated
Polarity selection function	Incorporated (Sliding switch allows selection of plus / minus ground) Minus ground: Correspond to PNP output light curtain Plus ground: Correspond to NPN output light curtain (Note) Please switch the sliding switch to the PNP side for minus ground and to the NPN side for plus ground.
Pollution degree	2
Degree of protection	Enclosure: IP40 Terminal: IP20
Ambient temperature	-10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -25 to +70 degrees -13 to +158 degrees Fahrenheit
Ambient humidity	30 to 85 % RH, Storage: 30 to 95 % RH
Vibration resistance	10 to 55 Hz frequency, 0.35 mm 0.014 in amplitude in X, Y, and Z directions for twenty times each
Connection terminal	Detachable spring-cage terminal
Enclosure material	ABS
Weight	Net weight: 320 g approx.