| Sensing method | Diffuse-reflective |
|---|---|
| Sensing distance | 5mm to 30mm (White paper 50 x 50 mm) |
| Light source | Red LED |
| Control output (Output type) | NPN open collector output |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Sensing method | Diffuse-reflective |
|---|---|
| Sensing distance | 5mm to 30mm (White paper 50 x 50 mm) |
| Minimum sensing object | 0.15 mm dia. Min. |
| Differential distance | 6 mm Max. |
| Light source | Red LED |
| Power supply voltage | 12 to 24 VDC -10% to 10% (ripple (p-p) 10% Max.) |
| Current consumption | 20 mA DC Max. |
| Control output (Output type) | NPN open collector output |
| Control output (Load current) | 0 to 50 mA |
| Control output (Residual voltage) |
(DC) 1 V Max. (Load current: Less than 10mA) (DC) 2 V Max. (Load current: 10 to 50mA) |
| Operation mode | Light-ON |
| Load power supply voltage | 26.4 VDC Max. |
| Protective circuit |
Surge suppressor Output short-cut protection Output short-circuit protection Power supply reverse polarity protection Mutual interference prevention |
| Response time | 1 ms Max. |
| Sensitivity setting | Not equipped |
| Ambient illuminance | Incandescent lamp: 5000 lux Max., Sunlight: 10000 lux Max. |
| Ambient temperature |
Operating: -25 to 55℃ Storage: -40 to 70℃ (with no icing or condensation) |
| Ambient humidity |
Operating: 35 to 85% Storage: 35 to 95% (with no icing or condensation) |
| Insulation resistance | 20 MOhm Min. at 500 VDC between charged parts and the case |
| Dielectric strength | 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case |
| Vibration resistance | 10 to 2000 Hz, 1.5-mm or 300 m/s**2 double amplitude for 0.5 hours each in X, Y, and Z directions |
| Shock resistance | 1000 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection | IEC60529: IP67 |
| Connection method | Pre-wired models (Cable length: 2 m) |
| Indicator | Operation indicator (orange), Stability indicator (green) |
| Tightening torque | 0.15 N・m Max. (with M2 screw via flat washers or spring washers) |
| Material (case) | PBT |
| Material (lens) | Denatured Polyarylate |
| Accessories |
Instruction manual, Set screws for mounting (M2*8), Nuts |


This website uses cookies (Learn more) and has a privacy policy (Learn more).



