HIKARI POWER

KEYENCE GL-R24Hราคา15000บาท

฿15000.00

GL-R24H

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : Stock_3E
รหัสสินค้า : 003222

รายละเอียดสินค้า KEYENCE GL-R24Hราคา15000บาท

Model			GL-R24H
Detection capability			ø0.98" ø25 mm
Beam axis spacing/Lens diameter			20 mm / ø5 0.79" / ø0.20"
Detecting distance			0.66 to 49.21' 0.2 to 15 m^*1
Effective aperture angle			Max. ±2.5° (When operating distance is 9.84' 3 m or more)
Light source			Infrared LED (870 nm)
Response time (OSSD) (ms)	Wire synchronization, One-line or Optical synchronization system (Channel 0)	ON→OFF	7
		OFF→ON	49.3^*2
		All blocked→ON	64.9^*3
	Optical synchronization system (Channel A or B)	ON→OFF	9.5
		OFF→ON	53^*2
		All blocked→ON	74.7^*3
Detection mode			Turns on when no interruptions are present in the detection zone
Synchronization between the transmitter and receiver			Optical synchronization or Wire synchronization (Determined by wiring)
Light interference prevention function			Prevents mutual interference in up to two GL-R systems. Optical synchronization: prevented by Channel A and B with setting switch Wire synchronization: prevented automatically
Control output (OSSD output)	Output		2 transistor outputs. (PNP or NPN is determined by the cable type)
	Max. load current		500 mA^*4
	Residual voltage (during ON)		Max. 2.5 V (with a cable length of 16.40' 5 m )
	OFF state voltage		Max. 2.0 V (with a cable length of 16.40' 5 m )
	Leakage current		Max. 200 μA
	Max. capacitive load		2.2 μF
	Load wiring resistance		Max. 2.5 Ω
Supplemental output (Non-safety-related output)	AUX		transistor outputs. (PNP or NPN is determined by the cable type) Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m )
	Error output
	Muting lamp output		Incandescent lamp (24 VDC, 1 to 5.5 W) LED lamp (load current: 10 to 230 mA) can be connected.
External input	When using a PNP output cable	EDM input Wait input Reset input Muting input 1, 2 Override input	ON voltage: 10 to 30 V OFF voltage: Open or 0 to 3 V Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
	When using an NPN output cable		ON voltage: 0 to 3 V OFF voltage: Open or 10 V or more Up to the power voltage Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
Rating	Power voltage		24 VDC ±20%, ripple (P-P) 10% or less, Class 2
Power supply	Current consumption (Max.) (mA)	Transmitter	57
		Receiver	72
Protection circuit			Reverse current protection, short-circuit protection for each output, surge protection for each output
Approved standards	EMC	EMS	IEC61496-1, EN61496-1, UL61496-1
		EMI	EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
	Safety		IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE) IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD) IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3) EN ISO13849-1:2015 (Category 4, PLe) UL508 UL1998
Environmental resistance	Enclosure rating		IP65/IP67 (IEC60529)
	Overvoltage category		II
	Ambient temperature		-10 to 55°C 14 to 131°F, No freezing
	Ambient temperature for storage		-25 to +60°C -13 to 140°F (No freezing)
	Relative humidity		15 to 85% RH (No condensation)
	Storage relative humidity		15 to 95% RH
	Operating ambientluminance		Incandescent lamp: 3,000 lx or less. Sunlight: 20,000 lx or less
	Vibration		10 to 55 Hz, 0.7 mm 0.03" compound amplitude, 20 sweeps each in the X, Y and Z directions
	Shock resistance		100 m/s² (approx. 10 G), 16 ms pulse in X, Y and Z directions, 1,000 times each axis
Material	Main unit case		Aluminum
	Upper case/lower case		Nylon (GF 30%)
	Front cover		Polycarbonate, SUS304
Weight	Transmitter		660 g