| Output Type | NPN output | |
|---|---|---|
| Form | Amplifier integrated | |
| Rated flow range ※ 2 | 2.5 ~ 50L / min | |
| Display range ※ 3 | 2.5 ~ 100L / min | |
| Settable range | 0 ~ 100L / min | |
| Zero flow rate cut ※ 4 | 2.5L / min | |
| Port size | Rc3 / 4 (20A) | |
| Available fluid | Water and non-corrosive liquid | |
| Available fluid conductivity | 5μS / cm or more | |
| Fluid temperature | and 0 ~ + 85 ℃ (without condensation) | |
| Operating pressure range | 1.0MPa below | |
| Withstanding pressure | 2.0MPa | |
| Pressure loss | 0.01MPa below | |
| Display type | 4-digit, 7-segment LED on the night 2-stage display, bar display (2-color) | |
| Display resolution | 0.1 / 1 (L / min) be selected from | |
| Repeatability ※ 5 |
0.5 s: ± 5% of FS, 1S: ± 3.5% of FS, 2.5 s: ± 2.5% of FS, 5S: ± 1.6% of FS, 10s: ± 1% of FS, 30S: ± 0.8% of FS, 60s: ± 0.6% of FS |
|
| Hysteresis (hysteresis) | Variable | |
| Response time (chattering prevention) | 500ms / 1s / 2.5s / 5s / 10s / 30s / 60s variable | |
| Integrated display unit | 0.1 / 1/10/100/1000 can be selected from (L) | |
| Integrated data storage period | Is written to memory every 10 seconds | |
| Memory backup |
EEPROM (data storage period: 10 years or more, data rewritable number of times: 1 million or more times) |
|
|
Control output / integrated pulse output / abnormal alarm output |
NPN open collector up to 100 mA / CH ※ 6 (NPN: 40V or less), residual voltage 1V or less, 3 output (NO / NC switchable) |
|
|
Integrated reset / bank switching / zero flow function |
No-voltage input (Reed, non-contact) input time 20ms or more selected either in the integrated reset and bank switching mode setting |
|
| Analog output |
4-20mA maximum load resistance 260Ω analog output range optionally can be set |
|
| Power-supply voltage | DC24V ± 10%, ripple (PP) ± 10% or less | |
| Power consumption (current consumption) | Normal: 1700mW (70mA), Eco mode: 1000mW (40mA) | |
| Protective structure | IP65 | |
| Environment resistance | Ambient temperature | and 0 ~ + 50 ℃ (without condensation) |
| Using ambient humidity | 35 ~ 85% RH (non-condensing) | |
| Vibration resistance | 10 ~ 55Hz double amplitude 1.5mm X, Y, Z, each direction 2 hours | |
| Material | Wetted parts | Cap: SCS13, passed through part: PPS, O-ring: fluorine rubber (FKM) |
| Other than the wetted parts | Case resin portion: PBT, Case metal parts: SUS430, Cable: PVC | |
| Mass | About 1100g | |
| accessories | instruction manual | |


This website uses cookies (Learn more) and has a privacy policy (Learn more).


