HIKARI POWER

MITSUBISHI QD75M4

฿0.00
MITSUBISHI QD75M4
เหลือ 0 ชิ้น
  • หมวดหมู่ : Mitsubishi
  • รหัสสินค้า : 003704

รายละเอียดสินค้า MITSUBISHI QD75M4

  • Control of up to four axis with linear interpolation
  • Storage of up to 600 positional data in the flash ROM (no back up battery necessary)
  • Units of travel can be defined in pulses, degrees, inches or mm
  • Configuration and presetting of all 600 positional data is performed via the PLC program or with the aid of the programming software GX Configurator QP
  • Operation across the motion network SSCNET

More specifications for the QD75M4 can be found in the table below.

QD75M4 SPECIFICATIONS
Number of control axes 4
Interpolation 2, 3 or 4 axis linear and 2 axis circular interpolation
Points per axis 600 pieces of data with PLC program, 100 pieces of data with GX
configurator QP 
Output type Differential driver
Output signal Pulse chain
Output frequency 1- 1000kHz
Positioning method PTP control: absolute data and/or incremental; speed/position
switching control: incremental; locus/speed control: incremental;
path control: absolute data and/or incremental
Positioning speed

 1          -1 000 000          pulse/s
0.01      -20 000 000.00  mm/min
0.001    -2000 000.000   degree/min
0.001    -200 000.00        inch/min 
Positioning acceleration/
deceleration processing 		 Automatic trapezoidal or S-pattern acceleration and deceleration or
automatic S-pattern acceleration and deceleration
Positioning acceleration
and deceleration time 		 1-8388608 ms (4 patterns, each can be set)
Positioning rapid stop
deceleration time 		 1-8388608 ms
Max. length for servo
motor cable 		 30 m
I/O points 32
Internal power consumption
(5 VDC) 		 820 mA
Weight 0.16 kg
Dimensions (WxHxD) mm 27.4 x 98 x 90
Part number QD75M4

สถิติของเว็บไซต์

เปิดเว็บเมื่อ : 27/07/2558
ปรับปรุงเว็บเมื่อ : 14/10/2569
ผู้ชมทั้งหมด :
สินค้าทั้งหมด : 493005

หมวดหมู่