| Electrical Specifications | |
| DC Voltage | Range: 0.1 mV to 1000 V Accuracy: ±(0.05% + 1) Maximum resolution: 10 µV |
| AC Voltage | Range: 0.1 mV to 1000 V Accuracy: ±(0.7% + 2) True RMS AC bandwidth: 20 kHz with low pass filter; 3 dB @ 1 kHz Maximum resolution: 0.1 mV |
| DC Current | Range: 0.1 µA to 10 A (20 A for 30 seconds maximum) Amps Accuracy: ±(0.2% + 2) Maximum resolution: 0.01 µA |
| AC Current | Range: 0.1 µA to 10 A (20 A for 30 seconds maximum) Amps Accuracy: ±(1.0% + 2) True RMS Maximum resolution: 0.1 µA |
| Resistance | Range: 0.1 Ω to 50 MΩ Accuracy: ±(0.2% + 1) Maximum resolution: 00.1 Ω |
| Capacitance | Range: 1 nF to 9999µF Accuracy: ±(1% + 2) Maximum resolution: 0.01 nF |
| Frequency | Range: 0.5 Hz to 199.99 kHz Accuracy: ±(0.005% + 1) Maximum resolution: 0.01 Hz |
| Duty Cycle | Range: 99.9% Accuracy: ±(0.2% per kHz + 0.1%) Maximum resolution: 0.1% |
| Temperature Measurements | –328 to 1994°F (–200 to 1090°C) excluding probe |
| 80 BK Temperature Probe | –40 to 500°F, ± 4.0°F or 2% (–40.0 to 260°C, ± 2.2°C or 2%) whichever is greater |
| Conductance | Maximum conductance: 60.00 nS Accuracy: ±(1.0% + 10) Maximum resolution: 0.01 nS |
| Diode | Range: 3 V Resolution: 1 mV Accuracy: ±(2% + 1) |
| Duty Cycle Range | Accuracy: within ±(0.2% per kHz + 0.1%) |
| Data Storage | Peak transient capture: 250µS Min/Max/Avg: Yes Reading hold: Yes |
| Display | Digital: 6000 counts updates 4/sec, 19,999 counts in high–resolution mode Analog bar graph: 32 segments, updates 40/sec Backlight: Yes Frequency: 19,999 counts, updates 3/sec at >10 Hz |
| Low Pass Filter | Measurement of VFDs: Yes |
| Environmental Specifications | |
| Operating Temperature | -4 to 131°F (–20 to 55°C) |
| Storage Temperature | -40 to 140°F (–40 to 60°C) |
| Humidity (Without Condensation) | 0 to 90% at 32 to 95°F (0 to 35°C) 0 to 70% at 95 to 131°F (35 to 55°C) |
| Operating Altitude | 6561.68' (2000 m) |
| Mechanical and General Specifications | |
| IP Rating | 30 |
| Shock | 3.3' (1 m) drop per |
| Vibration | Per MIL–PRF–28800 for a Class 2 instrument |
| Power | 3 x AA batteries, 400 hours typical without backlight |
| Dimensions | 7.9 x 3.9 x 2" (201 x 98 x 52 mm) |
| Weight | 0.8 lb (355 g) |
| Safety Specifications | |
| Compliance | CAT IV 600 V , CAT III 1000 V |
| Overvoltage Category | EN 61010–1 to 1000 V CAT III, 600V CAT IV |
| Agency Approvals | CE, CSA |


This website uses cookies (Learn more) and has a privacy policy (Learn more).



