HIKARI POWER

Omron H7AN-2DM AC100-240 ราคา 8,877.15 บาท

฿8877.15

จำนวน

เหลือ 0 ชิ้น

ซื้อเลย

หยิบลงตะกร้า

หมวดหมู่ : Omron
รหัสสินค้า : 045691

รายละเอียดสินค้า Omron H7AN-2DM AC100-240 ราคา 8,877.15 บาท

Function	1 Stage Preset Counter
Preset stages	1 stage
Rated supply voltage	100 to 240 VAC 50/60 Hz
Operating voltage range	85% to 110% of rated supply voltage
Power consumption	Approx. 10 VA (at 100 VAC)
External power supply	12 VDC+-10% 80 mA(permissible ripple: 5%(p-p) max.)
Counter (Count range)	0 to 99
Counter (Max. counting speed)	30 Hz Minimum counting input signal width: 16.7 ms (ON/OFF ratio: 1:1)
Counter (Input mode)	Increment or decrement (switchable)
Counter (Output modes)	N, F, C, R, K, P, Q
Counter (One-shot time)	0.1 to 1 s variable
Counter (Reset system)	External, manual, automatic and power reset(when set the SW3 for No memory backup)
Input signal	CP1 ,CP2 ,Reset
Input method	Voltage input
No-voltage input (Contact input)	Use a contact which can adequately switch 2.5 mA at 12 V.
Voltage input	Hight level: 5 to 30 VDC Low level: 0 to 2 VDC Input resistance: Approx. 4.7 kOhm
Minimum input signal width	External reset: 20 ms Manual reset: 20 ms Automatic reset: 100 to 1000ms(C, R, P and Q mode)
Control output (Contact output)	Output type: SPDT Switching capacity: 3 A at 250 VAC/30 VDC, resistive load (cos phi=1) Minimum applicable load: 10 mA at 5 VDC (failure level:P reference value)
Control output (Solid-state output)	Output type: Transistor output(NPN open collector) Output resistance: 1.5 kOhm Switchig capacity: 30 VDC max. 100mA max.
Display method	7-segment with LED display
Digit	2 digit
Character height	Count value: 10 mm (Red) Zero suppression: Not equipped
Prescaling function	Not provided
Key protection	Not provided
Teaching function	Not provided
Batch counting function	Not provided
Communications	Not provided
Memory backup	EEPROM (Number of rewite: 1000000 times min.)
Surrounding air temperature	Operating: -10 to +55 CEL (With no icing or condensation) Storage: -25 to +65 CEL (With no icing or condensation)
Ambient humidity	Operating: 35% to 85% Storage: 35% to 85%

Insulation resistance	100 MOhm min. (at 500 VDC) Between current-carrying terminals and exposed non-current-carrying metal parts / Between non-continuous contacts
Dielectric withstand voltage	Between current-carrying terminals and exposed non-current-carrying metal parts: 2000 VAC 50/60 Hz for 1 min Between non-continuous contacts: 750 VAC 50/60 Hz for 1 min
Impulse withstand voltage	Between power terminals: 6.0 kV Between current-carrying terminal and exposed non-current -carrying metal parts: 6.0 kV
Noise immunity	Between power terminals: +-2k V Between input terminals: +-500 V Square-wave noise by noise simulator (Pulse width: 100 ns/1 us, 1-ns rise)
Static immunity	+-8 kV (malfunction), +-15 kV (destruction)
Vibration resistance (Destruction)	10 to 55 Hz with 0.375 mm single amplitude for two hours each in three directions
Vibration resistance (Malfunction)	10 to 55 Hz with 0.25 mm single amplitude for ten minutes each in three directions
Shock resistance (Destruction)	300 m/s2 three times each in six directions
Shock resistance (Malfunction)	100 m/s2 two times each in six directions
Mechanical Life expectancy	10,000,000 operations min.
Electrical Life expectancy	100,000 operations min. (3 A at 250 VAC, resistive load)
Degree of protection	Case front: JEM IP30
Applicable standard (UL)	Standard No.: UL508 File number: E41515
Applicable standard (CSA)	Standard No.: CSA C22.2 No.14 File number: LR22310
Mounting method	Flush mounting
External connection method	Screw terminals
Case color	Light gray (Munsell 5Y7/1)
Attachment	Mounting bracket 2
Weight	Approx. 360 g