Huawei Smart Optimiser MERC-1100W-P for 3Ph Inverters,
Short Cable
The Huawei Smart Optimiser MERC-1100W-P gets the maximum
power out of the solar modules. The 2-in-1 optimiser can noticeably increase
the efficiency of the system: 1 optimiser serves 2 solar modules. It is
compatible with various modules. Pairing with the inverter is done extremely
quickly and easily.
The Huawei Smart Optimiser handles an input current of
20A and complies with overvoltage category II. The enormously high efficiency
of 99.5% is impressive.
It suits the following three-phase inverters: SUN2000
8-20KTL-M2, SUN2000 20-40KTL-M3, and SUN2000 12-25KTL-M5.
For PV modules with short power cables, the PV modules
can be installed only vertically.
KEY FEATURES
- Input cable
length: 0.1m
- One-fits-all element
- Rated Input DC Power: 1100 W
- Compatible inverters: SUN2000 8-20KTL-M2, SUN2000 20-40KTL-M3,
and SUN2000 12-25KTL-M5
- Max. Efficiency: 99.5 %
- Weighted efficiency: 99.0 %
- Max. Input current: 20A
- Overvoltage category: II-P is that it is a so-called
- Module accurate arc detection
- Physical view of the plant in less than 5 seconds
- Dimensions (W x H x D): 85 x 140 x 50 mm
- Input/Output Connector: connector: Original Stäubli MC4
- Output cable length: 0.1m (+), 5.1m (-)
- Protection class: IP68
NOTES
1. The
SUN2000-(600W-P, 450W-P2) cannot be used together with the MERC-1100W-P.
2. For the
MERC-1100W-P optimiser, one MPPT of the inverter can connect to only one PV
string.
3. The
capacity difference between PV strings connected to the same inverter must be
less than or equal to 2 kW.
4. Partial
configuration is not allowed. All PV modules must be connected to optimisers.
Otherwise, serious consequences may occur, and the resulting device damage is
not covered by the warranty.


This website uses cookies (Learn more) and has a privacy policy (Learn more).



